Before I started looking at manufacturing companies for my frame, there were a few things that I knew I wanted. First, I decided the finished bike would be a piece of art. So when it came down to form over function, form would win most of the time. Of course good looks is subjective. For me, I’ve loved airplanes all my life. So anything shaped like a wing and made of carbon fiber is at the top of my list. Then there is the cable issue, so internal cable routing is a must. Finally, since I spend most of my time climbing, it needs to be light. I’m going to shoot for a race equipped weight of 7.0 kg.
I spent the most time researching frames. There are a lot of ways to buy an open mold frame. If making a $500 PayPal payment to a company in China sounds crazy to you, then I would recommend searching eBay for “carbon road bike frame” and work through them. You are still ordering from China, but the transaction has the safety of going through eBay channels. A similar option is purchasing through alibaba.com. This is the Chinese version of Amazon, so you may get better pricing due to them being local to the seller and also have the transaction going through a trusted 3rd party. Finally, you can buy direct from the Chinese manufacturers. There are many out there, DengFu, HongFu, VeloBuild, and others. All I can say is if you go this route, do your research. Read everything you can about the frame you want and the manufacturer before buying. YouTube is a great place to start. Make sure you understand their return, warranty, and shipping policies.
If I wanted the lightest climber I could build, I would get a pure tubular frame at around 700g. But this is one of those places where form wins over function. I want a frame with “aero” shaped tubes. I don’t want to go full TT as that would leave almost nothing in the way of function on anything other than flats. So that puts the frame I want in the aero-road category. After looking at several dozen frames I decide on the DengFu FM098, which I will order direct. At around 1100g it’s not super light, but it has elegant curves, and I have read several blogs of people getting builds in the 6.8 kg range. Here is a picture off of their web site.
The FM098 has been around for several years. It had some problems originally with the seat post slipping, but those have been overcome with design improvements. There are many reviews of this frame as well as an independent structural test published on the DengFu web site. These are all things that need to go into researching the frame that is best for you. With that first decision out of the way, come a host of others; size, finish, bb type, and optional paint scheme. I chose the 52cm size as it closely resembles my Cannondale frame, which I had professionally fit when I bought it. For the finish, you can choose from three carbon finishes; unidirectional, 3K or 12K. The frame is made primarily of unidirectional or UD carbon. So a UD finish is just keeping it the way it was originally built. This is the lightest option. 3K and 12K finishes are just an outer layer of cosmetic fiber placed over the original frame. With any of the three finishes, you can also choose whether you want a matte or glossy overcoat applied. Here are some examples of what the finishes look like:
Matte finishes are all the rage as they look really stealthy and NASCARish, but I’m a bit old-school. If you have ever sat in a high-end Audi or BMW with a deep glossy carbon fiber dash, that is what drew me to a glossy finish. Again – to each his own. I didn’t just want a solid black frame. DengFu offers any custom paint scheme that you can design for a reasonable price. I’m not very creative, so I looked on their web site for examples and decided one of their standard paint schemes. I will be adding some white custom decals as well. For the bottom bracket, I’ll use BB30. This is the same configuration as my Cannondale, which if this whole thing goes south, allows me to upgrade that with the new components I will be purchasing. By buying this particular frame, the fork, seat post, clamp, and derailleur hanger are included. The headset is extra, but they will include one for $14.
The wheels were the second major decision I had to make. As with the frame, there are many Chinese carbon wheel sets available for $300-$500. First, I had to decide on rim depth. This required me to make a compromise between weight, form, aerodynamics, and control. I have found that on my aggressive Cannondale frame, even my 20mm alloy rims are a handful in strong crosswinds, so I didn’t want to get anything deeper than 50mm. An aero-road bike looks best with deeper rims, which pushes me toward 50’s, but I am also worried about weight. So with all of those factors, I am going with 38mm rims. The lightest rims available are from Farsports. Their 20.5mm wide rims weigh in at 1250 grams, which is around 200g lighter than most wheel sets in that category.
My biggest concern with these wheels was the fact that they are clinchers. Carbon has a notoriously low coefficient of heat transfer. That means that when you brake hard, the heat builds up on the rim and does not dissipate quickly like it does with alloy. That buildup of heat moves from the braking surface into the tires. When carbon clinchers first came out, there were reports of tires blowing during steep descents with heavy braking. The good news is that new carbons and resins have come out that solve this issue. If you are looking at carbon clinchers, make sure they have a basalt braking surface. Given that these wheels do, and I weigh in at 64 kg, I am confident that these wheels will look great and operate just as well in the hills.
Handlebars, Saddle, and Bottle Cages
Another purchase I am making for purely cosmetic reasons is an integrated handlebar. I have seen several videos with certain designs that have a huge amount of torsional flex. The design I chose is much less aero, so it should be stronger than those. Here is the design from DengFu:
They will have a 3K glossy finish to match the frame and wheels. They don’t cost very much and weigh about the same as an alloy set, so if they don’t work out, I consider them disposable and can switch them out for something proven. Likewise with the saddle and bottle cages. These are cheep and light, but round out the carbon set that I will purchase all from DengFu – excluding the wheels.
If you are clinching your teeth looking at that pure carbon saddle, remember, the padding is in your shorts, not on the seat. Here is the design of the bottle cages. Both the seat and cages are impossibly light, so I will start with these and see where it leads.
When you look at the weight weenies sites, most of the builds talk about a bike that weighs X kg for under $Y. Let me say up front that this is not that. This is about everything that I want in a bike for under 7 kg – that’s it. Well, 7 kg and well under $10K. But when it comes to components, there was only one way to go for me.
As I ride my Cannondale hating the cables strung all over the place, I realized, instead of hiding the cables, let’s get rid of them altogether – eTap.
When the SRAM eTap groupset came out, I knew that was the groupset I would put on my next bike. I’m a gadget freak, so show me wireless shifting with formula one style, and I’m all in. At this point, the bike is getting heavier, so a SRAM Red 11 drive train and brakes will keep it light. Finally the best upgrade I have purchased for my Cannondale is a power meter. Training has taken on a whole new meaning when you add kilowatts to the equation. So throw the latest Quarq DZero onto the cranks and we have ourselves one amazing bike.
A rough estimate of the weight is as follows:
|2x FD003 Carbon Bottle Cage + bolts||60|
|HB01 Carbon Handlebars + bolts||345|
|38mm G3 Wheelset w/Powerway R36 hubs||1600|
|SRAM Red Quarq Cranks||778|
|SRAM Aerolink Brakes||262|
|eTap Front Derailleur||187|
|eTap Rear Derailleur||239|
|SRAM XG-1190 Cassette||170|
|SRAM 11-speed Chain||246|
|SRAM Bottom Bracket Bearing Set||90|
|Pedals Look Keo Blade 2 Carbon||220|
|Tires Continental 4000||410|
Looks like I am in the ballpark. Time to start ordering parts.